? designed for smart-grid applications ? ecu-p1706 focuses on the vibration/ substation signal analytics (wind-power / smart substations) ? ecu-p1702 focuses on the partial discharge detection and analytical devices (smart substations) ? ECU-P1300 focuses on vibration applications (wind-power / smart substations) ? easy to install to ecu-1871 energy controller ecu-p1706 ecu-p1702 ECU-P1300 250 ks/s, 16bit, simultaneous 8-ch analog input pci-104 10 ms/s, 12bit, simultaneous 4-ch analog input pci-104 vibration signal modulate card new specifcations general ? power consumption typical: 5v @ 850ma ? bus type pci-104 ? i/o connector plug-in terminal block ? operating -20 ~ 70c (-4 ~158f) temperature @ 5 ~ 85% rh ? storage temperature -40 ~ 80c (-40 ~176f) ? storage humidity 5 ~ 95% rh, non-condensing (iec 60068-2-3) analog input ? channels 8 differential ? resolution 16 bits ? max. sampling rate 250 ks/s ? fifo size 8k samples ? overvoltage 30v protection ? input impedance 18m ? sampling mode software, onboard programmable pacer and external (ttl level) ? trigger mode delay to start trigger, delay to stop trigger ? trigger source analog trigger, external trigger ? input range (v. software programmable) bipolar 10v 5v 2.5v 1.25v accuracy % of fsr1lsb 0.04 0.04 0.06 0.08 timer counter ? channels 2 ? resolution 32 bits ? mode in: event counting, frequency in, pwm in ? compatibility isolated 24v dc ? max. input frequency 1 mhz ? max. output frequency 1 mhz ordering information ? ecu-p1706-ae 250 ks/s, 16bit, simultaneous 8-ch pci-104 specifcations general ? power consumption 5v @ 700ma (max.) 3.3v @ 850ma (max.) ? bus type pci-104 ? i/o connector bnc ? operating -20 ~ 70c (-4 ~158f) temperature @ 5 ~ 85% rh ? storage temperature -40 ~ 80c (-40 ~176f) ? storage humidity 5 ~ 95% rh, non-condensing (iec 60068-2-3) analog input ? channels 4 single-ended ? resolution 12 bits ? max. sampling rate 10 ms/s ? fifo size 32k samples ? overvoltage 15v protection ? input impedance 50 ohm/1m ohm/hi z switch selectable ? sampling mode software, onboard programmable pacer and external (ttl level) ? trigger mode delay to start trigger, delay to stop trigger ? trigger source analog trigger, external trigger ? input range 5v, 2.5v, 1v, 0.5v ordering information ? ecu-p1702-lae 10 ms/s, 12bit, simultaneous 4-ch pci-104 specifcations general ? power consumption typical: 5v @ 700ma; 12v @ 100ma ? operating -20 ~ 70c (-4 ~158f) temperature @ 5 ~ 85% rh ? storage temperature -40 ~ 80c (-40 ~176f) ? storage humidity 5 ~ 95% rh, non-condensing (iec 60068-2-3) vibration modulate ? channels 8 ? input range 5v (max.) ? output range 10v ? input coupling ac ? sensor current 4ma 1%, 24v compliant supply ? precision 0.1% ? drive ability 0 ~ 5k ? sensor signal gain 1 ? signal gain 1 ? analog filter 8th order lowpass bessel filters ? filter adjustable 0.1 hz ~ 25khz adjustable by software program ordering information ? ECU-P1300-ae vibration signal modulate card ecu-p1706 ECU-P1300 ecu-p1702 all product specifications are subject to change without notice last updated : 5-may-2015 www.advantech.com/products online download features
|